Penerangan
Rubber & Silikon molding is a manufacturing process whereby an amount of uncured rubber or silicone is transformed into a usable product.
Terdapat 3 jenis proses cetakan Getah & Silikon:
-Rubber compression molding
Placing a predetermined amount of rubber compound directly into the mold cavity and then compressing it into the shape of the cavity by closing the two sides of the mold.
-Acuan suntikan getah
In this Rubber & Silikon molding process the uncured rubber compound is heated to a liquid state before being injected into a mold. The product is released by opening the mold and closing it again to receive the next injection.
-Acuan pemindahan getah
During this Rubber & Silikon molding process the uncured rubber or silicon compound is placed in a part of the mold called a “pot” before being forced through an aperture into a cavity in the shape of the desired product. When cured, the mold is split releasing the final product.
Material from Auwell for Rubber & Silikon molding:
-Nitril atau Buna-N
Penyelesaian kos paling rendah dan paling rendah dalam pembuatan getah & silikon
-Nitril terhidrogenasi
This is a more expensive hydrogenated variation of Nitrile polymer, which increases its resistance to heat, petroleum products, and ozone almost fivefold.
-Ethylene Propylene DieneMonomer (EPDM)
Biasa digunakan dalam produk dicetak getah untuk sistem wap, penutup panel kenderaan, dan sistem pengereman kerana ketahanan tinggi terhadap bendalir brek
-Silikon
Tahan terhadap pendedahan pada suhu tinggi dan rendah, sangat fleksibel dan mempunyai ketahanan cuaca yang baik.
-Fluorosilicone
Combines the temperature range advantages of silicone with the resistance to oil, fuel, and solvents found in fluorocarbons.
-Neoprena
As a strong multi-purpose material, it can be used in a large number of rubber molding solutions. It has good fire resistant and abrasion properties and is frequently used in the manufacture of mass transit and transportation equipment
-Getah Asli
Produk semula jadi yang dihasilkan dari getah yang berasal dari pokok getah
-SBR (Styrene butadiene)
One of the more cost-effective polymers that can be used in rubber molding and is frequently used in the production of tires, diaphragms, seals and gaskets and the mass production of other rubber parts
-Fluorokarbon
This relatively expensive rubber compound combines a wide range of chemical resistance and high-temperature properties.
-Butyl
Mempunyai kebolehtelapan togas rintangan yang tinggi. Ini menjadikannya penyelesaian yang ideal dalam pengeluaran meterai untuk sistem tekanan tinggi dan gas dan vakum
-Urethane
Bahan yang cukup tinggi, tetapi sering digunakan dalam aplikasi yang dikenakan tekanan tinggi dan beban berterusan
Kelebihan
-Rich Experience
More than 20 years of experience in Rubber & Silikon molding parts development and part production, especially to the European and North American markets, with solid understanding of the material, technical and quality standards worldwide.
-Fast Turnaround
Secara amnya, kami menyediakan akuotasi dalam masa 3 hari bekerja. Menggabungkan teknologi dan kemudahan pembuatan terkini, Auwell dapat menyediakan prototaip pantas dalam 5 hari bekerja, untuk perkakas bersaiz sederhana dan kecil, kami dapat memberikan contoh pertama dalam 2 minggu.
-Comprehensive Solution Provider
Auwell provides comprehensive services for Rubber & Silikon molding parts development starting from designing, through prototyping, tooling/fixture development, sampling, mass production, and to logistic and post-sale support.
-Rigid QC Policies
The most rigorous quality policy starts from material control, and is followed through to final pre-shipment inspection for Rubber & Silikon molding parts orders. Material certificates include the mill certificate, 3rd party chemical components, and mechanical property reports, as well as RoHS and REACH reports upon request. We structure our processes, creating Flow Charts and Control Plans before production, making sure all QC processes are in accordance with ISO9001-2015 requirements and drawing specifications.
-Tempoh Pembayaran Fleksibel
Untuk perkakas, istilah pembayaran umum adalah 50% -50%, bermaksud deposit 50%, 50% setelah sampel pertama bebas. Pengeluaran Formass, kami menawarkan syarat pembayaran yang fleksibel, syarat kredit yang munasabah akan diberikan, pelanggan hanya membayar apabila mereka berpuas hati dengan produk yang mereka terima. Untuk projek jangka panjang, kami menawarkan perkhidmatan inventori call-off untuk keperluan penghantaran cepat.
Produk Berkaitan
The following catalogues of Rubber & Silikon molding parts are the ones which Auwell has produced and supplied to our distinguished worldwide clients. Please click the relevant pictures for details. Please be advised, most of the products are for demonstration purpose only.
Produk bahagian cetakan getah yang dibuat khas, Auwell memiliki pengalaman yang kaya dalam memanfaatkan proses yang dioptimumkan untuk menghasilkan produk yang berkualiti dengan harga yang kompetitif.
Custom made rubber molding valve parts product, Auwell has rich experience in utilizing optimized process to produce the quality product at competitive price.